Multi Fuunction Polyurethane Foam Cleaner / Expanding Foam Gun
PU Foam cleaner is used for cleaning the top, bore and the muzzle
of the applicator gun. And also can clean away the PU foam on the
clothes and skin. But it's only effective when the foam not cured
|Name||Polyurethane Foam Cleaner|
acetone, methane,methyl alcohol
1. Cleaning the top of the applicator gun: Disconnect the can and
gun first, then press the red nozzle onto the valve, slanting press
the nozzle to eject the cleanser to clean away the redundant foam
from the top of the applicator where is connected to a can's valve.
The same method is applicable to cleaning the muzzle of the PU foam
2. Cleaning the bore of the applicator gun: screw the can into the
top of the applicator, pull the trigger to make the cleanser eject
from the bore of the applicator. Continue to pull the trigger
unless all the redundant foam is cleaned away by the ejected
cleanser. Then unscrew the can.
3. IMPORTANT: clean away all the redundant foam from top and bore
of the applicator to reuse it. The action could be repeated.
1. Store in a cool, dry place; Avoid direct sunlight. Multi-purpose
PU foam cleaner spray
2. Keep away from heat, flame, spark and other source of ignition.
3. Do not clash, puncture or incinerate the can. Multi-purpose PU
foam cleaner spray
4. Keep out of reach of children. Multi-purpose PU foam cleaner
5. If accidentally to eyes, flush immediately with water for at
least 15 minutes.
6. If immodesty swallow, please seek immediate medical attention or
call physician immediately.